iConnectHue for Philips Hue

New in iConnectHue 5.12 Ready to go Pro? iConnectHue now supports the brand new Hue Pro Bridge! - Pro Bridge support - We were quick, hopefully quick enough for your switch to the all-new Pro Bridge. You can add and use it by today! It may look small, but making it work reliably took major changes under the hood. We’ve updated and fine-tuned a lot to ensure everything runs smoothly for you. New devices always mean a lot of research, redesign, and testing - and we’re committed to getting it right for you! (Included for Members, w/ 2025 upgrade or when purchased in 2025) - Pro Bridge migration - This is how you migrate from your old V2 Hue Bridge: • Make sure all devices on old Bridge have their latest firmware (turn all lights physically on, connect seasonal lights!) • Use the Hue app to migrate all settings and devices from V2 to Pro Bridge • Open iConnectHue, DO NOT reconnect or delete the old bridge there yet! • When multiple Bridges are supported Search and connect your new Bridge Migration notice should appear Follow the migration process to get all of iConnectHue's settings moved to your new Bridge • On single Bridge support Go to Devices->Your Bridge Select find / switch Bridge Select your new bridge (should state "Migrated Bridge") Follow the migration process to get all of iConnectHue's settings moved to your new Bridge • Now everything should be migrated In case the dialogue didn't appear our you cancelled, you can always migrate later under Devices->Your Bridge->Settings->Migrate old Bridge, but we recommend to do it right after your bridge connection. The migration process is also explained on our Homepage. Hint: You can still use the old Bridge via multi Bridge support or in another home! Reset it after the migration process though. - Pro Bridge limitations - The new Bridge is quite capable, but there are certain limitations you should know: • It doesn't support old Living Colors / Whites lights - either keep your old Bridge for them or get replacements. • You are STILL limited to the same amount of Rules and Actions on your Pro Bridge. This is a bit of a bummer, as this will limit how many devices you can configure. We are very hopeful that the Rule/Action limit could fall next year, but we can't say when, as this requires changes to the Hue Bridge firmware, which we do not control. • It supports the same amount of sensor/switch devices as your old Bridge does. So the rule/action limit might be less severe, but keep in mind that you can't have endless devices. • You can only migrate ONE Bridge with the Hue app. Multiple Bridges may be supported in the future. Right now we recommend to check your Bridge resources in its settings to see whether there's place for one more Bridge on there! • There is still only ONE active entertainment zone with 10 lights possible. This may change in the future as well. - Other bright ideas - • Improved Bridge addition process • Tap the Bridge percent resources in its settings and see the actual count • Fixes and stability improvements to keep everything smooth • Stay tuned: We're already working on some great new things to come - yes, again! Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! NOTE: We always support the current and the next iOS version. This will likely be the last version with iOS 17 support! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

5.12.1 • Updated for iOS 26 - NOTE: No full iPad windowing support! • Works around iOS 26 white icon bug New in 5.12 Ready to go Pro? iConnectHue now supports the brand new Hue Pro Bridge! - Pro Bridge support - We were quick, hopefully quick enough for your switch to the all-new Pro Bridge. You can add and use it by today! It may look small, but making it work reliably took major changes under the hood. We’ve updated and fine-tuned a lot to ensure everything runs smoothly for you. New devices always mean a lot of research, redesign, and testing - and we’re committed to getting it right for you! (Included for Members, w/ 2025 upgrade or when purchased in 2025) - Pro Bridge migration - This is how you migrate from your old V2 Hue Bridge: • Make sure all devices on old Bridge have their latest firmware • Use the Hue app to migrate all settings and devices from V2 to Pro Bridge • Open iConnectHue, DO NOT reconnect or delete the old bridge there yet! • When multiple Bridges are supported Search and connect your new Bridge Migration notice should appear Follow the migration process to get all of iConnectHue's settings moved to your new Bridge • On single Bridge support Go to Devices->Your Bridge Select find / switch Bridge Select your new bridge (should state "Migrated Bridge") Follow the migration process to get all of iConnectHue's settings moved to your new Bridge • Now everything should be migrated In case the dialogue didn't appear our you cancelled, you can always migrate later under Devices->Your Bridge->Settings->Migrate old Bridge, but we recommend to do it right after your bridge connection. The migration process is also explained on our Homepage. Hint: You can still use the old Bridge in addition or in another home! Reset it after the migration process though. - Pro Bridge limitations - The new Bridge is quite capable, but there are certain limitations you should know: • It doesn't support old Living Colors / Whites lights - either keep your old Bridge for them or get replacements. • You are STILL limited to the same amount of Rules and Actions on your Pro Bridge. This is a bit of a bummer, as this will limit how many devices you can configure. We are very hopeful that the Rule/Action limit could fall next year, but we can't say when, as this requires changes to the Hue Bridge firmware, which we do not control. • It supports the same amount of sensor/switch devices as your old Bridge does. So the rule/action limit might be less severe, but keep in mind that you can't have endless devices. • You can only migrate ONE Bridge with the Hue app. Multiple Bridges may be supported in the future. Right now we recommend to check your Bridge resources in its settings to see whether there's place for one more Bridge on there! • There is still only ONE active entertainment zone with 10 lights possible. This may change in the future as well. - Other bright ideas - • Improved Bridge addition process • Tap the Bridge percent resources in its settings and see the actual count • Fixes and stability improvements to keep everything smooth • Stay tuned: We're already working on some great new things to come - yes, again! Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! NOTE: We always support the current and the next iOS version. This will likely be the last version with iOS 17 support! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

New in iConnectHue 5.13 We go 13 with Halloween - our Spooky Halloween seasonal Animation set is back until mid Nov.! But wait - there's more... - Spooky Halloween Animations - We've updated our Spooky Halloween Animation set by Blood Moon and The Abyss, to give you an even greater choice for your Pumpkin fest. As always, this seasonal set is available until mid November. With a Membership, you'll have access to it throughout the entire year! (Included for Members, otherwise available until mid Nov.) - iPad multitasking support - We've added support for iPad multitasking on iPadOS 26. Sizing the app window is now supported and the app will adjust its content accordingly. This should make it possible for you to use iConnectHue alongside other app windows, we will fine tune certain circumstances in future releases. Although this has been quite some work, this is free for everybody! - Dutch translation - The Netherlands are the country where Hue originates from, hence we're proud to present iConnectHue in Dutch - Welkom! We would like to thank Mike Evers for his support with this translation! - Other bright ideas - • Fixes and stability improvements to keep everything smooth • Stay tuned: We're already working on some great new things to come - yes, again! Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! NOTE: We always support the current and the next iOS version. This will likely be the last version with iOS 17 support! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

5.13.1 * Solved several small issues New in iConnectHue 5.13 We go 13 with Halloween - our Spooky Halloween seasonal Animation set is back until mid Nov.! But wait - there's more... - Spooky Halloween Animations - We've updated our Spooky Halloween Animation set by Blood Moon and The Abyss, to give you an even greater choice for your Pumpkin fest. As always, this seasonal set is available until mid November. With a Membership, you'll have access to it throughout the entire year! (Included for Members, otherwise available until mid Nov.) - iPad multitasking support - We've added support for iPad multitasking on iPadOS 26. Sizing the app window is now supported and the app will adjust its content accordingly. This should make it possible for you to use iConnectHue alongside other app windows, we will fine tune certain circumstances in future releases. Although this has been quite some work, this is free for everybody! - Dutch translation - The Netherlands are the country where Hue originates from, hence we're proud to present iConnectHue in Dutch - Welkom! We would like to thank Mike Evers for his support with this translation! - Other bright ideas - • Fixes and stability improvements to keep everything smooth • Stay tuned: We're already working on some great new things to come - yes, again! Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! NOTE: We always support the current and the next iOS version. This will likely be the last version with iOS 17 support! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

5.13.2 * We've made your life a little easier before Christmas and solved some problems New in iConnectHue 5.13 We go 13 with Halloween - our Spooky Halloween seasonal Animation set is back until mid Nov.! But wait - there's more... - Spooky Halloween Animations - We've updated our Spooky Halloween Animation set by Blood Moon and The Abyss, to give you an even greater choice for your Pumpkin fest. As always, this seasonal set is available until mid November. With a Membership, you'll have access to it throughout the entire year! (Included for Members, otherwise available until mid Nov.) - iPad multitasking support - We've added support for iPad multitasking on iPadOS 26. Sizing the app window is now supported and the app will adjust its content accordingly. This should make it possible for you to use iConnectHue alongside other app windows, we will fine tune certain circumstances in future releases. Although this has been quite some work, this is free for everybody! - Dutch translation - The Netherlands are the country where Hue originates from, hence we're proud to present iConnectHue in Dutch - Welkom! We would like to thank Mike Evers for his support with this translation! - Other bright ideas - • Fixes and stability improvements to keep everything smooth • Stay tuned: We're already working on some great new things to come - yes, again! Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! NOTE: We always support the current and the next iOS version. This will likely be the last version with iOS 17 support! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

5.13.3 * We've made your life a little easier before Christmas and solved some problems New in iConnectHue 5.13 We go 13 with Halloween - our Spooky Halloween seasonal Animation set is back until mid Nov.! But wait - there's more... - Spooky Halloween Animations - We've updated our Spooky Halloween Animation set by Blood Moon and The Abyss, to give you an even greater choice for your Pumpkin fest. As always, this seasonal set is available until mid November. With a Membership, you'll have access to it throughout the entire year! (Included for Members, otherwise available until mid Nov.) - iPad multitasking support - We've added support for iPad multitasking on iPadOS 26. Sizing the app window is now supported and the app will adjust its content accordingly. This should make it possible for you to use iConnectHue alongside other app windows, we will fine tune certain circumstances in future releases. Although this has been quite some work, this is free for everybody! - Dutch translation - The Netherlands are the country where Hue originates from, hence we're proud to present iConnectHue in Dutch - Welkom! We would like to thank Mike Evers for his support with this translation! - Other bright ideas - • Fixes and stability improvements to keep everything smooth • Stay tuned: We're already working on some great new things to come - yes, again! Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! NOTE: We always support the current and the next iOS version. This will likely be the last version with iOS 17 support! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

New in iConnectHue 5.14 We have some firecrackers for you - on your lights AND with the app! Here we go: - Pro: Hue Sync Box support - iConnectHue now supports the Hue Sync Box - exclusively for Pro Members. The usual controls are easily accessible via the Dashboard, and we offer an exclusive feature: Presets! Presets allow you to store your current settings for brightness, the Entertainment Zone, the vis mode and the intensity for easy recall, instead of always needing to set up everything manually. This was a lot of work - not only to integrate, but also in the future to maintain and adapt over time as iOS and the Hue system evolve. Hence, this feature is available with a Pro Membership. We likely will add more functionality in the future for the Sync Box, based on your feedback. This is a beta feature! While we tested it extensively, we haven't yet had experience with it in the wider field. If you experience anything out of the ordinary, write us via the app, so we can improve it for you! How to add your Sync Box: Go to "Devices" via the menu, select "+" on the top right and select to add a Sync Box. (Exclusively available for Pro Members) - Firework animations - No smoke, no loud noises (your pets will aprove), but lots of visual fidelity! They're free: This seasonal set is available until January 1. With a Membership, you'll have access to it throughout the entire year! Remember: We also have two additional sets - "Happy new year!" and "Happy new yeah!". With the animation upgrade, you can upload these animations to switches for instant replay, or run them with a timer to start them exactly when you need them! - Other bright ideas - * You can now edit the stop mode of Entertainment areas * Better editing of Entertainment area in Discotainment Widget * Updated device search wizard: You can also add new Bridges there by now * We've polished a few things to make everything smooth for you Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

New in iConnectHue 5.14 We have some firecrackers for you - on your lights AND with the app! Here we go: - Pro: Hue Sync Box support - iConnectHue now supports the Hue Sync Box - exclusively for Pro Members. The usual controls are easily accessible via the Dashboard, and we offer an exclusive feature: Presets! Presets allow you to store your current settings for brightness, the Entertainment Zone, the vis mode and the intensity for easy recall, instead of always needing to set up everything manually. This was a lot of work - not only to integrate, but also in the future to maintain and adapt over time as iOS and the Hue system evolve. Hence, this feature is available with a Pro Membership. We likely will add more functionality in the future for the Sync Box, based on your feedback. This is a beta feature! While we tested it extensively, we haven't yet had experience with it in the wider field. If you experience anything out of the ordinary, write us via the app, so we can improve it for you! How to add your Sync Box: Go to "Devices" via the menu, select "+" on the top right and select to add a Sync Box. (Exclusively available for Pro Members) - Firework animations - No smoke, no loud noises (your pets will aprove), but lots of visual fidelity! They're free: This seasonal set is available until January 1. With a Membership, you'll have access to it throughout the entire year! Remember: We also have two additional sets - "Happy new year!" and "Happy new yeah!". With the animation upgrade, you can upload these animations to switches for instant replay, or run them with a timer to start them exactly when you need them! - Other bright ideas - * You can now edit the stop mode of Entertainment areas * Better editing of Entertainment area in Discotainment Widget * Updated device search wizard: You can also add new Bridges there by now * We've polished a few things to make everything smooth for you Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

New in iConnectHue 5.14 We have some firecrackers for you - on your lights AND with the app! Here we go: - Hue Sync Box support with Presets - iConnectHue now supports the Hue Sync Box for Pro Members. The usual controls are easily accessible via the Dashboard, and we offer an exclusive feature: Presets! Presets allow you to store your current settings for brightness, the Entertainment Zone, the vis mode and the intensity for easy recall, instead of always needing to set up everything manually. This was a lot of work - not only to integrate, but also in the future to maintain and adapt over time as iOS and the Hue system evolve. Hence, this feature is available with a Pro Membership. We likely will add more functionality in the future for the Sync Box, based on your feedback. This is a beta feature! While we tested it extensively, we haven't yet had experience with it in the wider field. If you experience anything out of the ordinary, write us via the app, so we can improve it for you! How to add your Sync Box: Go to "Devices" via the menu, select "+" on the top right and select to add a Sync Box. - Firework animations (one set free until Jan 1) - No smoke, no loud noises (your pets will aprove), but lots of visual fidelity! They're free: This seasonal set is available until January 1. With a Membership, you'll have access to it throughout the entire year! Remember: We also have two additional sets - "Happy new year!" and "Happy new yeah!". With the animation upgrade, you can upload these animations to switches for instant replay, or run them with a timer to start them exactly when you need them! - Other bright ideas - * You can now edit the stop mode of Entertainment areas * Better editing of Entertainment area in Discotainment Widget * Updated device search wizard: You can also add new Bridges there by now * We've polished a few things to make everything smooth for you Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

5.14.3 * We've improved some details to make your life easier New in iConnectHue 5.14 We have some firecrackers for you - on your lights AND with the app! Here we go: - Hue Sync Box support with Presets - iConnectHue now supports the Hue Sync Box for Pro Members. The usual controls are easily accessible via the Dashboard, and we offer an exclusive feature: Presets! Presets allow you to store your current settings for brightness, the Entertainment Zone, the vis mode and the intensity for easy recall, instead of always needing to set up everything manually. This was a lot of work - not only to integrate, but also in the future to maintain and adapt over time as iOS and the Hue system evolve. Hence, this feature is available with a Pro Membership. We likely will add more functionality in the future for the Sync Box, based on your feedback. This is a beta feature! While we tested it extensively, we haven't yet had experience with it in the wider field. If you experience anything out of the ordinary, write us via the app, so we can improve it for you! How to add your Sync Box: Go to "Devices" via the menu, select "+" on the top right and select to add a Sync Box. - Firework animations (one set free until Jan 1) - No smoke, no loud noises (your pets will aprove), but lots of visual fidelity! They're free: This seasonal set is available until January 1. With a Membership, you'll have access to it throughout the entire year! Remember: We also have two additional sets - "Happy new year!" and "Happy new yeah!". With the animation upgrade, you can upload these animations to switches for instant replay, or run them with a timer to start them exactly when you need them! - Other bright ideas - * You can now edit the stop mode of Entertainment areas * Better editing of Entertainment area in Discotainment Widget * Updated device search wizard: You can also add new Bridges there by now * We've polished a few things to make everything smooth for you Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

5.14.3 * We've improved some details to make your life easier New in iConnectHue 5.14 We have some firecrackers for you - on your lights AND with the app! Here we go: - Hue Sync Box support with Presets - iConnectHue now supports the Hue Sync Box for Pro Members. The usual controls are easily accessible via the Dashboard, and we offer an exclusive feature: Presets! Presets allow you to store your current settings for brightness, the Entertainment Zone, the vis mode and the intensity for easy recall, instead of always needing to set up everything manually. This was a lot of work - not only to integrate, but also in the future to maintain and adapt over time as iOS and the Hue system evolve. Hence, this feature is available with a Pro Membership. We likely will add more functionality in the future for the Sync Box, based on your feedback. This is a beta feature! While we tested it extensively, we haven't yet had experience with it in the wider field. If you experience anything out of the ordinary, write us via the app, so we can improve it for you! How to add your Sync Box: Go to "Devices" via the menu, select "+" on the top right and select to add a Sync Box. - Firework animations (one set free until Jan 1) - No smoke, no loud noises (your pets will aprove), but lots of visual fidelity! They're free: This seasonal set is available until January 1. With a Membership, you'll have access to it throughout the entire year! Remember: We also have two additional sets - "Happy new year!" and "Happy new yeah!". With the animation upgrade, you can upload these animations to switches for instant replay, or run them with a timer to start them exactly when you need them! - Other bright ideas - * You can now edit the stop mode of Entertainment areas * Better editing of Entertainment area in Discotainment Widget * Updated device search wizard: You can also add new Bridges there by now * We've polished a few things to make everything smooth for you Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

5.14.5 * "Young love" Valentine's day set available (until end of February) * "Winter dreams" Membership Bonus Magic Scene set added * Quicker app startup * Resolved a few problems New in iConnectHue 5.14 We have some firecrackers for you - on your lights AND with the app! Here we go: - Hue Sync Box support with Presets - iConnectHue now supports the Hue Sync Box for Pro Members. The usual controls are easily accessible via the Dashboard, and we offer an exclusive feature: Presets! Presets allow you to store your current settings for brightness, the Entertainment Zone, the vis mode and the intensity for easy recall, instead of always needing to set up everything manually. This was a lot of work - not only to integrate, but also in the future to maintain and adapt over time as iOS and the Hue system evolve. Hence, this feature is available with a Pro Membership. We likely will add more functionality in the future for the Sync Box, based on your feedback. This is a beta feature! While we tested it extensively, we haven't yet had experience with it in the wider field. If you experience anything out of the ordinary, write us via the app, so we can improve it for you! How to add your Sync Box: Go to "Devices" via the menu, select "+" on the top right and select to add a Sync Box. - Firework animations (one set free until Jan 1) - No smoke, no loud noises (your pets will aprove), but lots of visual fidelity! They're free: This seasonal set is available until January 1. With a Membership, you'll have access to it throughout the entire year! Remember: We also have two additional sets - "Happy new year!" and "Happy new yeah!". With the animation upgrade, you can upload these animations to switches for instant replay, or run them with a timer to start them exactly when you need them! - Other bright ideas - * You can now edit the stop mode of Entertainment areas * Better editing of Entertainment area in Discotainment Widget * Updated device search wizard: You can also add new Bridges there by now * We've polished a few things to make everything smooth for you Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

5.14.6 * Resolved a few problems New in iConnectHue 5.14 We have some firecrackers for you - on your lights AND with the app! Here we go: - Hue Sync Box support with Presets - iConnectHue now supports the Hue Sync Box for Pro Members. The usual controls are easily accessible via the Dashboard, and we offer an exclusive feature: Presets! Presets allow you to store your current settings for brightness, the Entertainment Zone, the vis mode and the intensity for easy recall, instead of always needing to set up everything manually. This was a lot of work - not only to integrate, but also in the future to maintain and adapt over time as iOS and the Hue system evolve. Hence, this feature is available with a Pro Membership. We likely will add more functionality in the future for the Sync Box, based on your feedback. This is a beta feature! While we tested it extensively, we haven't yet had experience with it in the wider field. If you experience anything out of the ordinary, write us via the app, so we can improve it for you! How to add your Sync Box: Go to "Devices" via the menu, select "+" on the top right and select to add a Sync Box. - Firework animations (one set free until Jan 1) - No smoke, no loud noises (your pets will aprove), but lots of visual fidelity! They're free: This seasonal set is available until January 1. With a Membership, you'll have access to it throughout the entire year! Remember: We also have two additional sets - "Happy new year!" and "Happy new yeah!". With the animation upgrade, you can upload these animations to switches for instant replay, or run them with a timer to start them exactly when you need them! - Other bright ideas - * You can now edit the stop mode of Entertainment areas * Better editing of Entertainment area in Discotainment Widget * Updated device search wizard: You can also add new Bridges there by now * We've polished a few things to make everything smooth for you Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

5.14.7: There once was a shamrock so bright, That danced with your Hue lights at night. With green glowing cheer, St. Paddy is here - And your lamps join the festive delight! • St. Patrick’s Day seasonal set – available for everyone until the end of March • Memory is expensive – we’ve made iConnectHue even smaller! • Resolved a few problems New in iConnectHue 5.14 We have some firecrackers for you - on your lights AND with the app! Here we go: - Hue Sync Box support with Presets - iConnectHue now supports the Hue Sync Box for Pro Members. The usual controls are easily accessible via the Dashboard, and we offer an exclusive feature: Presets! Presets allow you to store your current settings for brightness, the Entertainment Zone, the vis mode and the intensity for easy recall, instead of always needing to set up everything manually. This was a lot of work - not only to integrate, but also in the future to maintain and adapt over time as iOS and the Hue system evolve. Hence, this feature is available with a Pro Membership. We likely will add more functionality in the future for the Sync Box, based on your feedback. This is a beta feature! While we tested it extensively, we haven't yet had experience with it in the wider field. If you experience anything out of the ordinary, write us via the app, so we can improve it for you! How to add your Sync Box: Go to "Devices" via the menu, select "+" on the top right and select to add a Sync Box. - Firework animations (one set free until Jan 1) - No smoke, no loud noises (your pets will aprove), but lots of visual fidelity! They're free: This seasonal set is available until January 1. With a Membership, you'll have access to it throughout the entire year! Remember: We also have two additional sets - "Happy new year!" and "Happy new yeah!". With the animation upgrade, you can upload these animations to switches for instant replay, or run them with a timer to start them exactly when you need them! - Other bright ideas - * You can now edit the stop mode of Entertainment areas * Better editing of Entertainment area in Discotainment Widget * Updated device search wizard: You can also add new Bridges there by now * We've polished a few things to make everything smooth for you Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

5.14.8: • EASTER PACK: 8 great Magic Scenes - available for everybody until mid of April! • Resolved a few problems New in iConnectHue 5.14 We have some firecrackers for you - on your lights AND with the app! Here we go: - Hue Sync Box support with Presets - iConnectHue now supports the Hue Sync Box for Pro Members. The usual controls are easily accessible via the Dashboard, and we offer an exclusive feature: Presets! Presets allow you to store your current settings for brightness, the Entertainment Zone, the vis mode and the intensity for easy recall, instead of always needing to set up everything manually. This was a lot of work - not only to integrate, but also in the future to maintain and adapt over time as iOS and the Hue system evolve. Hence, this feature is available with a Pro Membership. We likely will add more functionality in the future for the Sync Box, based on your feedback. This is a beta feature! While we tested it extensively, we haven't yet had experience with it in the wider field. If you experience anything out of the ordinary, write us via the app, so we can improve it for you! How to add your Sync Box: Go to "Devices" via the menu, select "+" on the top right and select to add a Sync Box. - Firework animations (one set free until Jan 1) - No smoke, no loud noises (your pets will aprove), but lots of visual fidelity! They're free: This seasonal set is available until January 1. With a Membership, you'll have access to it throughout the entire year! Remember: We also have two additional sets - "Happy new year!" and "Happy new yeah!". With the animation upgrade, you can upload these animations to switches for instant replay, or run them with a timer to start them exactly when you need them! - Other bright ideas - * You can now edit the stop mode of Entertainment areas * Better editing of Entertainment area in Discotainment Widget * Updated device search wizard: You can also add new Bridges there by now * We've polished a few things to make everything smooth for you Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

New in iConnectHue 5.15 We've been in motion, to present you: - Motion Area support - iConnectHue now supports as first 3rd party app Hue Motion Areas. And we've added some extras for you: * Flexible manual setup * Inactivity times down to 30 seconds * Use Magic Scenes * Cancelling like Motion Sensors when the app is used * Disabling actually cancels inactivity actions You can find the cancelling options under Settings->Motion Sensor cancelling (groups). Select your area there if any action on a certain group should cancel the inactivity actions. Unfortunately, due to Bridge restrictions, we are otherwise limited to what you can do: Up to 3 rooms or one zone or your home is available, and we have a limited selection of possible actions that can be run. Note: The initial Motion Area setup needs to be made in the Hue app first in order to be able to configure it here. A Motion Area setup will be available at a later point. (Included in Pro Bridge support) - Reworked device editor - We've reworked many parts of the device editor for easier use and understanding. Although this has been A LOT of work, this is free for everybody by exception. If you like it, a good review really helps our small team! - Other bright ideas - * You can disable the swipe to the Dashboard under the Dashboard options menu * Contact sensor editing improved * We've added more fruits to the "Fruits" color set * We've polished MANY things to make everything smooth for you Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

5.15.1: * Housekeeping New in iConnectHue 5.15 We've been in motion, to present you: - Motion Area support - iConnectHue now supports as first 3rd party app Hue Motion Areas. And we've added some extras for you: * Flexible manual setup * Inactivity times down to 30 seconds * Use Magic Scenes * Cancelling like Motion Sensors when the app is used * Disabling actually cancels inactivity actions You can find the cancelling options under Settings->Motion Sensor cancelling (groups). Select your area there if any action on a certain group should cancel the inactivity actions. Unfortunately, due to Bridge restrictions, we are otherwise limited to what you can do: Up to 3 rooms or one zone or your home is available, and we have a limited selection of possible actions that can be run. Note: The initial Motion Area setup needs to be made in the Hue app first in order to be able to configure it here. A Motion Area setup will be available at a later point. (Included in Pro Bridge support) - Reworked device editor - We've reworked many parts of the device editor for easier use and understanding. Although this has been A LOT of work, this is free for everybody by exception. If you like it, a good review really helps our small team! - Other bright ideas - * You can disable the swipe to the Dashboard under the Dashboard options menu * Contact sensor editing improved * We've added more fruits to the "Fruits" color set * We've polished MANY things to make everything smooth for you Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

New in iConnectHue 5.16 - Support for wired Wall Switch Modules - iConnectHue now supports as first 3rd party app wired Hue Wall Switch Modules. This is great news, because you can configure them as you like: * Flexible manual and automatic setup * Use ALL actions you know from iConnectHue, like * Switching lights and groups * Scenes, Magic Scenes and Animations * Launch instant timers * Blink lights * ... and more! The new wired Wall Switch Modules don't need a battery and instead get their supply from mains - no battery replacement - ever! These are the available variants, currently solely available in Europe: * Wired module w/o any additional functions * Wired module w/ one dimmer channel * Wired modules w/ either one or two toggle channels All of these modules will behave like the original battery modules, with the addition that the ones with channels ALSO allow you to integrate existing lights or applicances that were originally toggled with your switch. (Available with Membership or 2026 Upgrade) - New Widget action - We've teached the Widget a new trick: You can now toggle the Hue MotionAware Area with it. Handy for situations where you're not moving enough, but still need your lights. (Available with Membership or 2026 Upgrade) - Other bright ideas - Again we've touched the app in several places to make your life and the app easier Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

New in iConnectHue 5.16 - Support for wired Wall Switch Modules - iConnectHue now supports as first 3rd party app wired Hue Wall Switch Modules. This is great news, because you can configure them as you like: * Flexible manual and automatic setup * Use ALL actions you know from iConnectHue, like * Switching lights and groups * Scenes, Magic Scenes and Animations * Launch instant timers * Blink lights * ... and more! The new wired Wall Switch Modules don't need a battery and instead get their supply from mains - no battery replacement - ever! These are the available variants, currently solely available in Europe: * Wired module w/o any additional functions * Wired module w/ one dimmer channel * Wired modules w/ either one or two toggle channels All of these modules will behave like the original battery modules, with the addition that the ones with channels ALSO allow you to integrate existing lights or applicances that were originally toggled with your switch. (Available with Membership or 2026 Upgrade) - New Widget action - We've teached the Widget a new trick: You can now toggle the Hue MotionAware Area with it. Handy for situations where you're not moving enough, but still need your lights. (Available with Membership or 2026 Upgrade) - Other bright ideas - Again we've touched the app in several places to make your life and the app easier Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!

5.16.2: * You can now access light timers via the options in the light list * Small changes & improvements New in iConnectHue 5.16 - Support for wired Wall Switch Modules - iConnectHue now supports as first 3rd party app wired Hue Wall Switch Modules. This is great news, because you can configure them as you like: * Flexible manual and automatic setup * Use ALL actions you know from iConnectHue, like * Switching lights and groups * Scenes, Magic Scenes and Animations * Launch instant timers * Blink lights * ... and more! The new wired Wall Switch Modules don't need a battery and instead get their supply from mains - no battery replacement - ever! These are the available variants, currently solely available in Europe: * Wired module w/o any additional functions * Wired module w/ one dimmer channel * Wired modules w/ either one or two toggle channels All of these modules will behave like the original battery modules, with the addition that the ones with channels ALSO allow you to integrate existing lights or applicances that were originally toggled with your switch. (Available with Membership or 2026 Upgrade) - New Widget action - We've teached the Widget a new trick: You can now toggle the Hue MotionAware Area with it. Handy for situations where you're not moving enough, but still need your lights. (Available with Membership or 2026 Upgrade) - Other bright ideas - Again we've touched the app in several places to make your life and the app easier Heads up: If widgets or shortcuts act up, try restarting your device - it’s an iOS thing, not an us thing! - We’d love your feedback! - Enjoying the update? We worked hard to bring this to you — and your support keeps the lights on (literally)! •• Give us five stars in the App Store! Even if you've rated before, a fresh review helps! •• If you run into any issues, don’t hesitate, contact us from within the app under "Help & More"->Contact. You will surely get support! Need a quick check for a question? We also have an elaborate FAQ: https://iconnecthue.com/f-a-q/ Thanks for leaving the lights on!